When To Replace The Exhaust Filter; Replacing The Airclean Exhaust Filter; Replacing The Active Airclean 30 And Hepa Airclean 30 Exhaust Filters - Miele HS08 Instructions D'utilisation

en-US
 Lift up the filter frame until it clicks
and remove the old filter. Hold the fil-
ter by the clean, unsoiled section to
remove it.
 Replace with a new dust compart-
ment filter.
 Close the filter frame.
 Insert the FilterBag into the holder as
far as it will go.
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to pinch the Fil-
terBag when doing so.

When to replace the exhaust filter

Depending on the model, your vacuum
cleaner will come standard with one of
the following exhaust filters (Fig. 02):
a AirClean
Replace this filter every time you start a
new packet of Miele FilterBags. An Air-
Clean exhaust filter is supplied with ev-
ery packet of Miele FilterBags.
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
Replace this filter when the exhaust fil-
ter change indicator is completely red
(Fig. 07).
This occurs after approx. 50 hours of
operation, which is equivalent to about
a year of average use. The vacuum
cleaner can still be used. However, the
power will be reduced as will the effec-
tiveness of the filter if it is not replaced
in due time.
20

Replacing the AirClean exhaust filter

(Fig. 28, 29, + 30)
Do not use more than one exhaust fil-
ter at a time.
 Open the exhaust filter compartment
lid.
 Remove the filter frame.
 Open the filter frame and remove the
used AirClean filter by one of the
clean, unsoiled sections.
 Replace it with a new AirClean ex-
haust filter.
If you wish to install an Active Air-
Clean 30 or HEPA AirClean 30 ex-
haust filter, see "Replacing one type
of exhaust filter with another."
 Secure the catch on the filter frame
and reinsert the frame in the exhaust
filter compartment.
 Close the exhaust filter compartment
lid.
Replacing the Active AirClean 30 and
HEPA AirClean 30 exhaust filters
Do not use more than one exhaust fil-
ter at a time.
 Open the exhaust filter compartment
lid.
 Remove the exhaust filter (Fig. 31).
 Insert the new exhaust filter and
press the exhaust filter change indi-
cator (Fig. 05).
After approx. 10 - 15 seconds, a thin
red stripe will appear on the left-hand
side of the display (Fig. 06).