Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.3 Operation
•
Turn the fireplace on and let it warm up.
•
Fan operation may vary based on the on/off switch and/or fan
speed control you have chosen to use. See Section 3.0 on page
12.
2.4 Maintenance
The #HTK-INT must occasionally be cleaned to maintain its
performance. To clean:
1.
Turn off the fan.
2.
Remove the air grille and vacuum it.
3.
Remove (6) screws securing the fan cover plate.
4.
Unplug the fan from the receptacle.
5.
Vacuum the fan and the housing to remove dust and lint.
6.
Plug the fan back into the receptacle.
7.
Reattach the fan cover plate using (6) screws previously
removed.
8.
Reattach the air grille using (2) screws previously removed.
Heat Transfer Kit #HTK-INT R.7
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
11
Publicité
Chapitres
Table des Matières
