Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Headgear reassembly
Pixi Hints!
•
You don't need to disassemble your Pixi headgear to wash it.
•
The Velcro
ease of assembly.
Headgear reassembly steps
1.
Lay the headgear and plastic buckles out on a flat surface as shown,
ensuring the lower headgear arms are facing up.
2.
Thread each light blue strap up and over the light blue buckle, then
secure into place.
3.
Thread each dark blue strap up and over the dark blue buckle, then
secure into place.
4.
Thread the Velcro only end of the lower headgear strap through the
lower headgear arm, then secure into place. There is no need to
attach the quick release clip to the headgear now.
Ensure that any Velcro or plastic parts are on the outer side of the mask,
otherwise your headgear may be incorrrectly assembled. The headgear is
now ready for fitting. Refer to the Set up illustrations in this guide.
straps and plastic buckles have been color coded for
™
1
3
12
2
Publicité
Table des Matières
