Rotary Hammer Safety Warnings - SPARKY HD PROFESSIONAL BPR 18Li HD Notice Originale

5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d) Under abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
6. SERVICE
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Rotary hammer safety
warnings
Wear ear protectors with rotary hammers.
Exposure to noise can cause hearing loss.
▪ Use the auxiliary handle supplied with the ma-
chine. Loss of control can cause personal injury.
During operation provide eye protection to
prevent eyes from exposure to flying parti-
cles. Wear goggles.
Take protective measures against inhalation
of dust. Some materials can contain toxic ingre-
dients. Wear a dust mask and work with dust/
chip extraction when connectable.
▪ Be aware that this tool is always in operating conditBe
aware that this tool is always in operating condition,
because it does not have to be plugged into an electri-
cal outlet. Always set the trigger switch to the locked
OFF position when installing or removing the battery
pack.
▪ Hold the power tool by the insulated gripping sur-
faces when performing operations where the op-
erating tool could contact hidden wiring. Contact
with a «live» wire will also make exposed metal parts
of the power tool «live» and shock the operator.
▪ Do not process materials containing asbestos. Asbes-
tos is considered carcinogenic.
▪ While operating the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more securely with both hands.
▪ Prior to operation use suitable detectors to determine
Original instructions
pages-BPR 18Li HD.indd 5
if utility lines are hidden in the work area or call the lo-
cal utility company for assistance. Contact with elec-
tric lines can lead to fire and electric shock. Damaging
a gas line can lead to explosion. Penetrating a water
line causes property damage or may cause electric
shock.
▪ Always be sure you have a firm footing. Be sure no
one is below when using the tool in high locations.
▪ Use clamps or a vice to secure your work whenever
possible.
▪ Watch out for the initial torque reaction of the machine
or upon jamming the drill bit. Switch the power tool
immediately upon jamming the drill bit. Watch out for
high reactive torque which may result in kick-back.
The drill bit will block if the power tool is overloaded or
if the bit jams into the material.
▪ Do not touch the drill bit or the processed part during
operation and immediately after that; they may be ex-
tremely hot. You may get serious burns.
▪ Keep work area clean. Blends of materials are par-
ticularly dangerous. Dust from light alloys can burn or
explode.
▪ Rags, cloths, cord, string and the like should never be
left around the work area.
▪ Always switch the machine off prior to leaving it down.
▪ The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual
will be considered a case of misuse. The user and not
the manufacturer shall be liable for any damage or in-
jury resulting from such cases of misuse.
▪ To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operat-
ing instructions found in this Manual. All persons who
use and service the machine have to be acquainted
with this Manual and must be informed about its po-
tential hazards. Children and frail people must not use
this tool. Children should be supervised at all times if
they are in the area in which the tool is being used. It
is also imperative that you observe the accident pre-
vention regulations in force in your area. The same
applies for general rules of occupational health and
safety.
▪ The manufacturer shall not be liable for any changes
made to the tool nor for any damage resulting from
such changes.
Even when the tool is used as prescribed it is not pos-
sible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construc-
tion and design:
▪ Damage to hearing if effective ear defenders are not
worn.
▪ Power tools must not be used outdoors in rainy weath-
er, or in moist environment (after rain) or in close vicin-
ity with easily flammable liquids and gases. The work-
ing place should be well lit.
5
EN
10.7.2017 . 9:56:28