Technical Data - Clatronic DBS 3611 Mode D'emploi

4. Open the fill opening (13).
5. Fill the tank up to the maximum mark. Do not overfill!
6. Close the fill opening.
7. You can now continue ironing.
When you have finished
1. Always set the temperature control to "MIN" after use.
Remove the mains plug from the socket.
2. Allow the device to cool down before you put it away.
WARNING:
• Always remove the mains lead before cleaning!
• Wait until the machine has cooled down completely!
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Children shall not perform cleaning without supervision.
• Clean the casing with a slightly damp cloth.
• Clean the sole plate and the rest with a slightly damp cloth.
• Any residual water can remain in the water tank, but should
be poured out if it has been in the tank for a prolonged
period.
Troubleshooting
Fault Possible Cause
Device does not Faulty mains socket Try another socket.
work.
The device Is the electric circuit
suddenly stops overloaded?
working during
operation.
No steam is The lime filter
generated. cartridge is mission
or has not been set
correctly.
The water tank has
not been installed
correctly.
Cord and pipe storage
•
•
1. Turn off the appliance.
2. Disconnect the mains plug from the mains.
3. Remove the water tank.
4. Remove the anti-scale filter cartridge.
5. Install the scale filter cartridge as described in "Before initial
Cleaning
Fault
Water leaks
from the
soleplate.
Loud noises
during steam
operation
Model: ........................................................................... DBS 3611
Power supply: ................................................... 230 V~, 50/60 Hz
Power consumption: ......................................................... 2200 W
Remedy
Protection class: ........................................................................... I
Maximum filling quantity of the water tank: .................... 2.3 litres
Net weight: ........................................................... approx. 2.90 kg
Check the house fuse.
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
Check the position of
CE guidelines, such as electromagnetic compatibility and low
the lime filter cartridge.
voltage directives, and has been constructed in accordance
with the latest safety regulations.
A "click" confirms that
the water tank has
been set correctly.
Wind the mains cord around the cord groove on the foot of
the base.
Place the connection pipe in the cord clip.
Replacing the scale filter
operation"  "Inserting the anti-scale filter" .
Possible Cause
The temperature is
set too low.
The tank is empty. Check the tank.

Technical Data

Remedy
Select a temperature
between " " and
" ".
Fill tank with water.
39