ProFusion GD8115BP-L Mode D'emploi page 6

Or
2. Set Desired Temperature
Or
Or
Or
Or
3.
POWER-OFF TIMER
Set the
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set
time, and can only be set while the heater's display is in the "On" position.
Or
Select a heat Mode.
Press the MODE button to toggle between the three heat
settings.
High Mode uses 1500W; Low Mode uses 1000W. ECO
mode is an Economic Energy Saving Function. When
ECO mode is chosen, the heater will set the temperature
automatically to 68℉ (20℃) under this mode.
Adjust the desired temperature by pressing the Up/Down
arrows on the control panel or remote control.
Desired temperature options vary from 59℉ to 86℉, or from
15℃ to 30℃. Once you have chosen the desired temperature,
the heater will remain on until the room temperature increases
to that temperature on the digital display. The heater will cycle
on and off to maintain that desired room temperature.
Press ℃/℉ button to change the display temperature between
Fahrenheit and Celsius.
The Fahrenheit indicator LED will light, when the temperature
is displayed in Fahrenheit.
The Celsius LED will light, when the temperature is displayed
in Celsius.
Function
Turn the heater to the "On" position. Press the Timer
button on the heater's control panel or the remote.
6