Remote Control; Preparation - ProFusion GD8115BP-L Mode D'emploi

7. Mode button: For selecting running mode.
8. Temp up button: For setting temp upward.
9. Temp down button: For setting temp downward.
10. ℃/℉Button: Button for alternating between Fahrenheit and Celsius.
11. Timer button: Used for setting the timer and adjusting time value of the timer.
12. Fahrenheit indicating light
13. Timer indication light: The light's on when timer functions.
14. Signal-receiving window: For receiving remote control signal.
15. Celsius indicating light

Remote Control

PREPARATION

Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
And turn on the power switch in the rear of the unit.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
1. Start and select working mode
Or
Temp up button: To make set temperature rise
ON/OFF button: Used for power-on or power-off
Temp down button: To make set temperature decline
Mode button: Used for mode selection
℃/℉button : Button for alternating between Fahrenheit and Celsius.
Timer button: Used for setting timer and adjusting time value of the timer.
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Turn the heater off by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Note: Powering off the heater will stop the heating process
only. The fan will continue to blow for approximately 3
more minutes to allow for the interior components to cool.
The fan will then turn off automatically.
5