ProFusion GD8115BP-L Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

POWER-ON TIMER
4. Set the
Note: The Power-ON-Timer Function will allow for the heater to power ON after a certain set
time, and can only be set while the heater's display is in the "Off" position.
Or
5. Set Electro Lock
The Electro Lock can help avoid the heater from being accidentally engaged by children. The
locking mechanism can be set in both the ON and OFF modes.
And
And
MAINTENANCE
1. Turn off the power switch in the rear of the unit.
2. Unplug the unit and let it cool completely
The digital display changes from the "temperature" to the
"hours" option for the timer. Continue to press the timer
button to change the number of hours you would like the
heater to run before powering itself off. The hour options
for the timer are from 0 to 12 hrs. (in 1 hr increment).
The selected hour increments will flash for a few seconds,
then revert back to the set desired temperature. The Timer
indicator light will remain lit as long as the Timer is set.
The heater will power OFF when the internal heater clock
counts down the hour increments you set.
Function
Turn the heater to the "OFF" position. Press the Timer
button on the heater's control panel or the remote.
The digital display shows the "hours" option for the timer.
Continue to press the timer button to change the number of
hours you would like the heater's internal clock to count
down before powering itself on. The hour options for the
timer are from 0 to 12 hrs. (in 1 hr increment).
The Timer indicator light will remain lit as long as the
Timer is set. The heater will power itself ON when the
internal heater clock counts down the hour increments you
set.
Press Temp Up and Temp Down buttons at the same time
for 3 seconds. Locking is complete when you hear a beep.
When locked, the functions of the control panel and remote
will be locked for use.
When you need to unlock it, press Temp Up and Temp
Down buttons at the same time for 3 seconds. You will hear
a beep. The control panel and remote control will become
functional again.
7

Publicité

Table des Matières
loading

Table des Matières