Advanced Settings Tab; Ssi Interface; Noise Filter; Average Filter - Balluff BTL7 Série Manuel

BTL7-S510(B)-... / BTL7-S5 _ _ C-... / BTL7-S5 _ _ D-...
BTL7 Configuration Tool
3
Windows and tabs (continued)
3.5

Advanced settings tab

3.5.1

SSI interface

The following operating modes are available for selection:
– Asynchronous operation
The external sampling frequency is independent of the
internal sampling frequency of the BTL.
– Synchronous operation
The internal sensing cycle adjusts itself to the external
sampling cycle. The position delay is kept as short and
constant as possible.
Algorithm 1 is the standard algorithm which produces
the most stable results in the majority of applications.
Should deviations in control behavior arise, algorithm 2
may produce better results. (Not all BTL models
support both algorithms.)
12 english
3.5.2

Noise filter

To prevent noise in the rest position, a noise filter can be
activated. The filter levels available for selection range from
1 (weak) to 3 (strong).
3.5.3

Average filter

An average filter that calculates the average value of the
last 2, 4, or 8 values (depending on setting) can be
activated.