Niko 101-78050 Mode D'emploi page 130

1XX-7805X
5. TROuBLESHOOTING
Problem
The flush-mounting
motion detector
does not switch on.
129
Cause
The reaction
threshold is set to
twilight in a brightly
illuminated room.
The lens is covered
or dirty.
The electronic
control gear or the
fuse is defective.
The wiring is faulty. Check the wiring.
Action
Correctly set the
light intensity (lux
value).
Uncover or clean
the lens.
Replace the
defective electronic
control gear or the
defective fuse.
EN