Niko 101-78050 Mode D'emploi page 121

1XX-7805X
B. Programming as motion detector
You want an action to occur when someone enters the sensor's
detection area.
Sensor
1. Set the sensor to the starting
mode.
3. Set the sensor to the manual
mode.
The red LED lights up. At
the same time, a Nikobus
'sensor on' telegram is sent.
EN
Nikobus module
2. Set the Nikobus module to
the programming mode.
Select the output and mode
required.
4. Exit the programming mode.
1XX-7805X
120