Niko 101-78050 Mode D'emploi page 129

1XX-7805X
• After the preset switch-off delay has elapsed, the 'sensor
off' telegram is sent.
B. Programming as light sensor
Select channel 2 of the motion detector: channel 2A (light sensor
on) or channel 2B (light sensor off).
Take into account the behaviour of the sensor as described below:
• When the value of the ambient light falls below the preset
light sensitivity, the 'light sensor on' telegram is sent.
• When the value of the ambient light rises above the preset
light sensitivity, the 'light sensor off' telegram is sent.
EN
1XX-7805X
128