Fan Operation; Cleaning And Maintenance - EDM Product 33937 Mode D'emploi

33937
REF.

FAN OPERATION

- Place the fan on a flat and dry surface.
- Before connecting the device to the network, make sure that the switch is in the "0"
position.
- Plug the power cord into the 220 / 240V - 50Hz AC outlet.
- With the 3-speed system you can turn on the fan. This system is designed to give you the
maximum flexibility. You can also activate the oscillation function using the oscillation
switch.
POSITION 0: position at OFF
POSITION 1: first speed
POSITION 2: second speed
POSITION 3: third speed
OSCILLATION: oscillation button /fixed position
- If you do not use the fan for a long time, unplug the cord from the electrical outlet.
- Never try to disassemble the device from the engine.
- If you notice any anomaly (such as unusual fan noise), turn off the device and unplug it
immediately.
- Make sure that no objects or liquids enter the inside of the fan through the openings in
your box.
- The fan should only be used in dry environments.
- Protect the device from dust, moisture, sunlight and direct heat.

CLEANING AND MAINTENANCE

-Make sure that the appliance is switched off before cleaning it.
- Clean with a soft damp cloth, without detergent, aggressive liquids or solvents.
- Do not immerse the fan in water or any other liquid.
- If the fan is not going to be used for a long period of time, clean and protect it and keep it
in a dry place.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD