WARNING:
• Cleaning and user maintenance shall not be made by children,
unless they are older than 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than
8 years.
• Children shall not play with the appliance.
• Appliances can be used by persons with reduced physical, sen-
sory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards
involved.
• This device is not intended to be immersed in water during clean-
ing. Please observe the instructions that we have included in the
chapter "Cleaning".
• Do not touch any moving parts of the machine and always wait for it
to stop.
• Do not remove the lid during operation.
Overview of the Components
1 On/off switch
2 Motor housing
3 Lid with filler hole
4 Stirring attachment
5 Bowl
6 Mounting ring
7 Housing
8 Outlet unit
9 Foot
Page 5
A Lower shaft
B Blades
C Wing screw
D Stirring attachment (frame)
Unpacking the appliance
1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic films, filler
material, cable ties and cardboard packaging.
38
3. Check the content for any missing parts.
NOTE:
There may be dust and production residue on the appliance.
We recommend cleaning the appliance as described under
"Cleaning".
Assembly of the appliance
Familiarize yourself with the assembly of the appliance before
making ice cream for the first time. Please refer to the pictures
on pages 3 and 4.
1. Fig. A: Place the motor housing into the recess of the lid
and let it lock into place.
2. Fig. B: Attach the assembled stirring attachment to the
bottom of the motor housing. Before doing so, check the
correct assembly of the stirring attachment (see "Cleaning
Stirring attachment").
3. Fig. C: Place the housing onto the foot, if you have discon-
nected these components previously.