General Safety Advice For Electrical Power Tools - Parkside PGG 15 A1 Instructions D'utilisation Et Consignes De Sécurité

Introduction / General safety advice for electrical power tools
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration: 1.582 m / s
Uncertainty K = 1.5 m / s
been measured in accordance with a standardised measurement pro-
cedure specified in EN 60745 and can be used to compare devices.
Different uses of the device give rise to different vibration levels and in
many cases they may exceed the values given in these instructions. It is
easy to underestimate the vibration load if the electrical power tool is
used regularly in particular circumstances.
Note: If you wish to make an accurate assessment of the vibration
loads experienced during a particular period of working, you should
also take into account the intervening periods of time when the device
is switched off or is running but is not actually in use. This can result in
a much lower vibration load over the whole of the period of working.
General safety advice for
electrical power tools
Failure to observe the safety advice and instructions may result in electric
shock, fire and / or serious injury.
Keep all the safety advice and instructions in a safe place
for future reference!
2
2
The vibration level given in these instructions has
Read all the safety advice and instructions!
GB 57