Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
High performance soldering iron 200 W
Item No. 2226177
Intended Use
This high-performance soldering iron is suitable for mechanical soldering such as sheet metal
processing, installation jobs or rough soldering. The soldering tip reaches a temperature of
approx. 490 °C.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• 1 x soldering iron with AC mains cable (Protective contact plug)
• 1 x metal sheet stand
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• This device may be used by persons (including children) with limited physical,
sensory or mental aptitude or a lack of experience and/or knowledge only if they
are supervised by a person responsible for their safety or instructed in safe use
of the device.
• Children must be supervised so they do not play with the device.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Before plugging in the device, verify that the information on the product's rating
plate correspond with your household power supply.
• The power socket must be in the vicinity of the device and easily accessible. Never
unplug by tugging on the cord, use the provided gripping surfaces on the plug
itself. Unplug the device when it is not in use.
• For safety reasons, always unplug the device in case of a thunderstorm.
• Make sure that the power cable is not squeezed, bent, damaged by sharp corners
or otherwise subjected to mechanical stress. Prevent the power cable from
becoming too hot and too cold. Do not alter the power cable. Failure to follow
these instructions may lead to a damaged power cable. A damaged power cable
can cause fatal injury due to electric shock.
• If the power cable is visibly damaged, do not touch it. First make sure the power
socket is voltage-free (i.e. by flipping the circuit breaker) and then carefully unplug
the cable. Never use the product if the cable is damaged. Never plug in or unplug
the power cable with wet hands.
• To prevent risks, damaged power cables may only be replaced by the manufacturer,
a professional workshop appointed by the manufacturer, or a similarly qualified
person.
• The soldering tip becomes very hot. Do touch it.
• Always set down the hot soldering iron on a heat-resistant surface. Set down the
soldering iron and its tip using the provided metal stand.
• After use, allow the product to cool down to room temperature.
• Use only in closed rooms, never outdoors. Avoid contact with moisture, such as by
use in the bathroom, at all costs.
• Never submerge the product in water or other liquids. Risk of electric shock!
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Care and Cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Input voltage / current ................... 230 V/AC, 50 Hz
Power consumption ...................... 200 W (± 10%)
Soldering tip .................................. max. 490 ºC, 19 mm (ø)
Chisel shaped, tapered (45 degrees)
Materials ....................................... PA, rubber, copper, stainless steel
Cable length ................................. 1.5 m
Dimensions (ø x L) ....................... 41.5 x 386 mm
Weight .......................................... 910 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2226177_V1_0320_02_mxs_m_en
Publicité
