Maintenance And Service; After-Sales Service And Application Service - Bosch UniversalChainPole 18 Notice Originale

Problem Possible Cause
Saw chain teeth facing wrong way/direction
Over heating of tool
External or internal wiring defect
On/Off switch (16) defective
Battery and charger
Problem Possible Cause
Flashing red battery Battery not (properly) inserted
charge indicator
Battery contacts contaminated
Battery defective
Battery charge indicat- Mains plug of battery charger not plugged in
ors do not light up (properly)
Socket outlet, mains cable or battery charger de-
Battery will not charge
fective
Battery and charger defective
Battery defective
Charger defective

Maintenance and Service

Maintenance, Storage and Transportation (see
figure P)
Before any work on the machine itself (e. g. mainten-
u
ance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch with the locking button.
Do not modify the product. Unauthorized modifications
u
may impair the safety of your product.
Before storing, clean the product with a cloth before stor-
age.
Remove the oil from the oil tank before storage.
When transporting or storing the pole pruner, always fit the
guide bar cover.
Note: Do not leave pole pruner hanging on a branch in the
tree when interrupting work.
Store and transport telescopic pole pruner with battery re-
moved and protection blade cover placed.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
Bosch Power Tools
Corrective Measure
Reassemble with saw chain teeth in correct direc-
tion
Allow machine to cool down and restart
Contact Bosch Service Center
Contact Bosch Service Center
Corrective Measure
Properly insert battery in charger
Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery
Replace the battery
Insert mains plug (fully) into the socket outlet
Check the mains voltage; have the battery char-
ger checked by an authorised after-sales service
agent for Bosch power tools
Replace battery and charger
Replace battery
Replace charger
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
strictions.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
English | 23
F 016 L94 061 | (23.12.2020)