Gurari GCH S 411 PRIME Manuel D'installation Et D'utilisation page 8

Usage
Extractor hoods with a touch switch have 4 ventilation speeds. Depending on the volume of
evaporation when cooking, you can select low, middle or high ventilation level.
The touch switch of the operation modes of the motor and lighting lams is located on the decorative
glass of the extractor hood:
0 - Infrared sensor
1 - Light on/off
2 - Fan on/off
3 – Clock display
4 - Speed increase
5 - Speed decrease
Waiting mode turns on as soon as the extractor hood is connected to electricity.
You can select motor speed, switch lamps and activate function "fan timer" with the help of switch
just touching the relevant symbol-button. Display (3) reflects the number of selected speed or time.
To switch the fan on touch the button 2, 4 or 5.
To switch the fan off, touch the button 2.
While switching on the fan will work with the speed, selected before switching off.
The speed is shown on the display.
To increase speed, touch the button 4.
To decrease speed, touch the button 5.
To switch the light on/off touch the button 1.
In standby mode, the display shows the time. To set the time, touch buttons 4 and 5 in standby mode
at the same time. To change minutes, touch, or hold your finger near the button 4, hours – the button
5, respectively.
Turbo level
When the hood is switched on at the 4th speed (turbo mode), after 5 minutes of work the hood
automatically switched to the 3rd speed.
Timer / off timer
To activate timer simultaneously touch the buttons 4 and 5 while switching the fan on. The timer time
will be flashing and the timer time will be shown on the display for 10 seconds.
To change the timer work time, touch the button 4 (to increase) or 5 (to decrease) while the display
is flashing.
The timer time is changed from 15 to 90 minutes.
The number of selected speed will appear on the display in 10 seconds.
To switch off the timer change the speed, or turn off the fan.
Remote control
The remote control controls the corresponding functions. Buttons 4 and 5, as well as
button 1 turn on the hood. Button 1 turns off the hood during operation. Button 2
turns the light on or off. With button 6 one can activate the timer and set it as
described above. Button 3 does not work on this unit (no automatic mode).