Important; Aux In Function - Roadstar HRA-1520MP Manuel D'instructions

Listening to Programmed Tracks
Press the Play Pause button (7). Disc play will start at the beginning of the first programmed track.
To Clear The Program Memory
If the disc is playing, press the Stop button (5) to stop the disc.
Switch the Function (12) selector to MW or FM to clear the Program.
REPEAT DISC PLAY
Use the Repeat button (2) to listen to an entire disc or one track repetitively.
For repeat disc play of all the tracks on the CD/MP3
Press the Stop button (5) first, then press the Repeat button (2) twice. The REPEAT indicator
will light up.
Press the Play/Pause button (7).
The disc will then begin playing through to the end of the last track. At which point it will
automatically return to the beginning of the first track. This will continue until the Stop button
(5) is pressed.
If the Repeat button (2) is pressed once more, the Repeat indicator will be cancelled, repeat
play will end, and normal disc play will resume from that point.
When the last track has finished playing, the CD player will then Stop.
For repeat play of one track
Press the Repeat button (2) once. The REPEAT indicator will flash.
Select the desired track by pressing the Forward or Reverse Skip Track buttons. The selected
track will be shown on the CD display.
Press the Play/Pause button (7).
The selected track will then begin playing through to its end. At which point it will automatically
return to the beginning of that track. This will continue until the Stop button (5) is pressed.
If the Repeat button (2) is pressed twice more, the Repeat indicator will go off, Repeat play
will end, and normal disc play will resume from that point.
When the selected track has finished playing, the CD play will Stop.

AUX IN FUNCTION

1. You can put the other audio products through the Aux in jack (13).
All manuals and user guides at all-guides.com
English 7 8 English

IMPORTANT

Since movement of the CD mechanism and the sensitive circuitry may cause interference
to a radio tuner nearby switch this unit off while operating other radio devices.
This product utilizes a laser
Danger - Invisible laser radiation when opened and interlock failed or defeated. Avoid
direct exposure to the beam.
Caution - Use of controls, adjustments, or procedures not listed in this manual may result
in hazardous radiation exposure.
Concerning Compact Discs
Only compact discs identified with this mark can be used with
this player.
SPECIFICATIONS
Power Supply
AC: 230V ~ 50Hz
Radio Frequency Coverage
FM: 88 - 108MHz
MW: 540 - 1600kHz
CD Player
Pick Up: 3-Beam. Semiconductor Laser
Encoding: 16-Bit Linear
Specifications and the design are subject to possible modifications without notice due to improvement.