Peg-Perego Ypsi Notice D'emploi page 10

EN_English
Thank you for choosing a PegPerego product.
The "double adapters Ypsi" are PegPerego
adapters compatible with the Ypsi
PegPerego chassis, transforming it into a
twin or family stroller.
It is possible to fasten the following
components in various combinations:
- PRIMO VIAGGIO LOUNGE
- PRIMO VIAGGIO i-Size/i Plus
- PRIMO VIAGGIO SL (manufactured after
01/07/18).
- YPSI BASSINET
- COMPANION SEAT
- YPSI SEAT
WARNING
_ IMPORTANT: READ
CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
The child's safety could be
at risk if these instructions
are not followed.
_ This product was designed
for the transport of 1 child
in the seat.
_ Do not use this product
for a number of occupants
greater than that intended
by the manufacturer.
_ WARNING: When using
the adapters: Ypsi
double adapter, Ypsi Seat
(Companion Seat) is type-
approved for children from
6 months of age up to 15 kg
of weight in the seat.
- Ypsi Chassis + Car Seat:
is approved for children
from birth up to 13 kg of
weight ;
When used in combination
with car seat, this vehicle
does not replace a cot or a
bed.
Should your child need to
sleep, then it should be
placed in a suitable pram
body, cot or bed.
Ypsi Chassis + Ypsi Bassinet:
is approved for children
from birth up to 9 kg of
weight.
When used in combination
with pram body : this
product is suitable for a
child who cannot sit up
by itself, roll over and a
cannot push itself up on it's
hands and knees. Maximum
weight of the child : 9 kg.
The carrying handle (if
present) should be left
outside the pram body
and out of the child's reach
during use.
_ Attach the adapters onto
the chassis before attaching
the bassinet, seat and car
seat.
_ WARNING: check the
adapters are properly
attached onto the chassis
10