Mounting The Connecting Plate - Binder VD Série Manuel De Montage

GB GB
3.2.

Mounting the connecting plate

An additional consolidation is obtained by mounting the delivered connecting plate. Unscrew the ac-
cording Phillips screws at the vacuum drying oven and at the vacuum module and use them to fasten
the connecting plate.
Fixation of the connecting plate:
Sizes 23 and 53 : Fixation with 6 screws
Size 115 : Fixation with 8 screws
With VDL, mounting this connecting plate is part of the grounding concept.
Mounting instructions for vacuum module10/2016
Vacuum drying oven
Vacuum module
Page 15/32