Cleaning Reminder - Philips HQ7782 Mode D'emploi

Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.

cleaning reminder

When you have switched off the shaver, the
,
cleaning reminder å (green tap symbol with
flashing water jet) lights up for 6 seconds to
remind you that the shaver should be cleaned.
If the red shaving unit symbol Î and the cleaning
,
reminder å light up together, the shaving heads
have become so dirty or damaged that they
might cause the motor to become blocked. If the
shaving heads are dirty, you have to clean them.
If the shaving heads are damaged, you have to
replace them (see chapter 'Replacement').
Note: We advise you to avoid this situation by cleaning
the shaving heads regularly.
cleaning
The shaver reminds you that it needs to be cleaned
by showing the cleaning reminder å after every
shaving session.
Shaving unit: Quick Clean after every shave
1 Make sure the appliance is switched on.
2 Keep the shaving unit closed.
3 Rinse the shaving unit and the hair chamber
under a hot tap by letting the water run
through the openings below the shaving unit
for at least 30 seconds.
4 Shake off excess water.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
EnglisH
15