Infrared Remote Control; Operation - Chauvet DJ SWARM WASH FX Mode D'emploi

IRC-6 Infrared
Remote
Control
IRC-6 Operation
Swarm Wash FX User Manual (Version 2)
The Swarm Wash FX is compatible with the IRC-6 infrared remote control from Chauvet.
To activate IR mode, press any button on the IRC-6.
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
between the remote and the product.
Auto Mode
To run the product in an auto program:
1. Press <AUTO> on the IRC-6.
Sound-Active Mode
To run the product in a Sound-Active program:
1. Press <SOUND> on the IRC-6.
Speed Adjust
To adjust the speed of the auto program:
1. Press <SPEED>
2. Use <+> or <-> to increase or decrease the program speed.
To modify Auto and Sound-Active Mode effects with IRC-6 Buttons:
Auto Mode / Sound-Active Mode
<1> - Turn On/Off wash effect
<2> - Turn On/Off derby effect
<3> - Turn On/Off laser effect
<4> - Turn On/Off strobe effect
Black Out
To black out the light:
Press <BLACK OUT> on the IRC-6.
This will turn off the light until the button is pressed again.
NOTE: The IRC will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may have
inadvertently activated Black Out.
All other buttons on the IRC-6 infrared remote control have no function with this
product.
Page 25 of 124