Operation; Control Panel Operation; Menu Map; Auto And Sound Modes Defined - Chauvet DJ SWARM WASH FX Mode D'emploi

4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the life
of your laser. Always disconnect the Swarm Wash FX from power when not in use.
Control Panel

Operation

Menu Map

Mode
DMX
Auto
Speed
Sound
IR Function

Auto and Sound Modes Defined

Program
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Swarm Wash FX User Manual (Version 2)
To access the control panel functions, use the four buttons located underneath the display.
When the product is on, the LED monitor on the rear panel will show the current operating mode
(Standalone or DMX). The product will retain the last saved settings when powered off.
Button
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Programming Steps
2-CH
18CH
P--
S--
SND
SET
Effect
All Effects- Derby, Laser, Strobes and Wash
Wash Only
Laser Only
Derby Only
Strobes Only
Wash, Laser and Derby
Wash, Laser and Strobes
Wash, Derby and Strobes
Laser, Derby and Strobes
Wash and Laser
Wash and Derby
Wash and Strobes
Laser and Derby
Laser and Strobes
Derby and Strobes
Function
Description
–d511
d001
Sets DMX address and personality
–d495
d001
P 1-15 Selects Auto Program Effect and speed (slow to fast)
–S.99
S.01 Speed for Sound Mode and Auto Programs
SN 1-15 Selects Sound Active Mode Program Effects
ON
On/Off IR functions
OFF
Page 19 of 124