Activated Carbon Filter Installation - CIARRA CBCB4850-OW Manuel De L'utilisateur Et D'installation

Activated Carbon Filter Installation:

1. Activated carbon filter can be used to trap odors.
In order to install the activated carbon filter, the grease filter should be
detached first. Press the lock and pull it downward.
2. Plug the activated carbon filter into the unit and turn it in clockwise
direction. Repeat the same on the other side.
3. Install the grease filter. If replacement, please turn it in anti-clockwise
direction.
NOTE:
➢ Make sure the filter is securely locked. Otherwise, it would loosen and
cause dangerous.
➢ When activated carbon filter attached, the suction power will be lower.
➢ The activated carbon filter should be changed every 3 months depending
on the conditions of us.
Installation
11
EN