Getting Started; Switching On / Off; Setting The Level Of Magnification; Viewing Modes - Optelec multiview HD Manuel D'utilisation

Optelec

4. Getting Started

Switching On / Off

Press the On / Off switch located on the right side of the base unit
to turn the MultiView HD on or off.

Setting the level of magnification

Press the + and – button located at the centre of the control pad,
or on the camera head, to adjust the level of magnification. To
increase the magnification, press the + button and to decrease it,
press the – button. To adjust the level of magnification in a
continuous manner, press and hold down either buttons for a few
seconds. The MultiView HD can magnify text and objects from 2
to 81 times their original size (depending on the monitor size) and
at a surface distance of 40 cm away from the camera.

Viewing modes

Pressing the Mode button on the control pad or on the camera
head will cycle you through 8 different viewing modes:
Full Color Photo Mode
−
This mode will display text, pictures and objects in full color.
− Gray Scale Photo Mode
This mode will display text, pictures and object in shades of gray.
Positive Reading Mode (High contrast black on white)
−
This mode enhances the foreground / background contrast. Pictures
and text will be displayed with a black foreground on a white
background.
− Negative Reading Mode (High contrast white on black)
This mode reverses the positive image. Pictures and text will be
displayed with a white foreground on a black background.
− High contrast white on blue
This mode will display white text on a blue background.
− High contrast yellow on black
This mode will display yellow text on a black background.
− High contrast blue on yellow
This mode will display blue text on a yellow background.
High contrast green on black
−
This mode will display green text on a black background.
English
MultiView HD
13