Electrical Connection - Jaga AURORA H52-TYPE11 Instructions D'installation

ELECTRICAL CONNECTION

The appliance must be installed by a qualified installer in accordance with the applicable national
and local standards and regulations.
Aurora is equipped with a power cord with plug, length 1.5 metres, which is accessible at the top by
removing the grille. To make the electrical connection inside the casing, cut off the plug. Installation
see page 58-59.
Electrical connection WITHIN the casing:
The electrical cable for the connection within the casing must be at least 80 cm in length.
Installation: see 06A p. 59.
EMALE
Connecting the connector
FEMALE
MALE
Electrical connection OUTSIDE the casing:
Bring the plug downwards through the bottom of the casing and plug the device in to the socket.
Installation: see 06B p. 61.
VAC
max . m
L/
FEMALE
CLASS 2 APPLIANCE CLASSIFICATION IPX2
MALE
N L
L N
CLASS 2 APPLIANCE CLASSIFICATION IPX2
Option:
Waterproof cable gland IP66/IP68 (5m - 3h)
ref.: 5093.501
MALE
N L
L N
|
jaga AURORA Installation instructions 57
EN
N L
N L
L N
L N