Environment Protection - Krups Aquacontrol FLF2 Mode D'emploi

• If your appliance works only intermittently
before the boiling point or stops before
reaching the boiling point, it is probably
scaled up.
If your appliance is still not working,
contact a KRUPS approved service center.
Troubleshooting
Problem Possible Cause
Stops before Kettle not plugged Check that plug is
boiling in.
No water or
scale build-up.
Water tastes like New kettle.
plastic.

Environment protection

The packaging of your product is recyclable.
Do not dispose of it with the rest of your
waste but rather recycle the packaging or
bring it to your nearest recycling facility.
Bouilloire US/F/E .PM6.5
Solution
securely in the
electrical outlet.
Leave the kettle to
cool and then fill
with water. Use the
switch to turn it on.
The kettle should
begin to work again
after about 15
seconds.
Consult descaling
section of instruc-
tions for information
and removing scale
build up.
Kettle should be
boiled twice and
water discarded be-
fore use.
If problem persists,
fill kettle to max and
boil two teaspoons
of bicarbonate of
soda. Boil and throw
away water. Rinse
kettle thoroughly.
7 20/09/04, 15:49
7