Changing Presettings With A Hand-Held Unit - SOLTRON V-60 Shuttle Turbo Plus Instructions D'utilisation

Changing presettings with a hand-held unit

Some data can also be displayed and changed with a commercially
available hand-held unit (e.g. from Palm). For this purpose you require
special software (available in German and English). Please call
1-866-243-9861 for more details.
Caution!
The code for access via the infrared interface is preset in
the software of the hand-held unit, and can therefore be
used with any unit. Anyone, who downloads the software
from the Internet can access the unit date with a hand-held
unit. Please note that Customer Service changes the preset
access code during initial start-up – see software operating
manual. Please note the new code for future use!
This code is independent of the access code for the preset-
tings via the control panel.
Note:
Please read the operating manual for the software for in-
structions on how to display or change data with a hand-
held unit.
50
Information on operating the hand-held unit is contained in the manufac-
turer's documentation.
IR Function
I R
04508 / 0