Identification And After-Sales Service; Technical Specifications - Grillo DUMPER 507 2008 Mode D'emploi Et Maintenance

INTENDED USE OF THE MACHINE
Use only original accessories and spares which assure maintenance of the machine's safety.

IDENTIFICATION AND AFTER-SALES SERVICE

SERVICING
This handbook provides the instructions for using the crawler truck. For a correct basic maintenance
contact your Local Dealer.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and interchangeability.
Each order should include the machine serial number and the code of the spare part needed.
WARRANTY
The warranty is subject to the terms and conditions stated on the card.
As regards the engine, the individual manufacturers' conditions apply.
RECOMMENDED SPARE PARTS TO BE KEPT ON HAND
1 set of belts
1 clutch cable
HOW TO ORDER SPARE PARTS
Always state the machine's serial number and the code of the spare part needed. Contact our authorised
service centres. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47023 CESENA (FC) ITALY
Tel. 0039 - 0547 - 633.111 / Fax 0039 - 0547 - 632.011
Web site: www.grillospa.it / e-mail: grillo@grillospa.it

TECHNICAL SPECIFICATIONS

ENGINE TYPES:
LOMBARDINI 15 LD 350 DIESEL
ROBIN 9HP OHV AND 8,5 HP OHV
IDENTIFICATION
The crawler truck is provided with an ID plate
showing the machine's serial number, located on
the chassis under the body.
8