Unpacking And Removing Shipping Material - LG WT7850H A Série Manuel Du Propriétaire

10 INSTALLATION
Unpacking and Removing
Shipping Material
Unpack all shipping materials from the washer
for proper operation and inspect it for shipping
damage.
CAUTION
• Failure to remove shipping materials can
cause excessive noise and vibration.
1
Lift the washer off the foam base.
• After removing the carton and shipping
material, lift the washer off the foam base.
Make sure the plastic tub support comes off
with the base and is not stuck to the bottom of
the washer.
• If you must lay the washer down to remove
the base packaging materials, always protect
the side of the washer and lay it carefully on
its side. Do not lay the washer on its front or
back.
Plastic tub support
2
To prevent damage, do not remove the foam
block containing the owner's manual, parts,
and laundry product samples from the washer
tub until the washer is in the final location.
NOTE
• Once removed, save the foam block for future
use. If the washer needs to be moved, the
foam block will help prevent damage during
transportation.
3
Unfasten the power cord from the back of the
washer.
Carton base