LG WT7850H A Série Manuel Du Propriétaire page 44

44 TROUBLESHOOTING
Problem
Packaging materials were not removed.
• See Unpacking and Removing Shipping Material in the INSTALLATION
Wash load may be unevenly distributed in the drum.
• Pause the cycle and redistribute the load after the lid (door) unlocks.
Vibrating noise
Not all leveling feet are resting firmly and evenly on the floor.
• See Leveling the Appliance in the INSTALLATION section.
Floor not rigid enough.
• Make sure that the floor is solid and does not flex. See Flooring in the
Packaging materials were not removed.
Squeaking noise
• See Unpacking and Removing Shipping Material in the INSTALLATION
Plumbing in the home moves or flexes when the water valves in the washer
shut off.
Banging noise
• Water hammer is not caused by a defect in the washer. Install water hammer
when washer is
filling with water
(Water Hammer)
Household water supply pressure is very high.
• Adjust household water supply regulator to a lower pressure or contact a plumber.
section.
INSTALLATION section.
section.
arrestors (purchased separately at hardware or home improvement store)
between the fill hose and the washer for best results.
Possible Cause & Solutions