Using The App - Allegion Schlage Sense Mode D'emploi

ENABLE/DISABLE 1-TOUCH LOCKING
Press
Programming
Programming
CHANGE ACCESS CODE LENGTH
Press
Programming
Programming
indicator light
ENABLE/DISABLE AUTO-LOCK
Press
TEMPORARILY DISABLE AUTO-LOCK
Deadbolt should be locked to begin.
Press
RESTORE AUTO-LOCK
Relock the deadbolt
using the thumbturn
Alarm features can be programmed using the app.

Using the app?

Press
Enter
Code
indicator light
2 blinks
blinks
+ 2 beeps
Press
Enter
8
Code
blinks
Enter
Programming
Code
Programming
indicator light
blinks
+ 2 beeps
Enter
Access Code
2 blinks
+ 2 beeps
Just follow the instructions in the Schlage Sense application! These
manual programming instructions will not work if you set up your
lock with the app!
7
Enter
Desired
Access Code
Length
Press
9
2 blinks
Within 5 seconds,
manually lock and
unlock the deadbolt
using the thumbturn.
WARNING:
Enter Same
Changing
Desired
the access
Access Code
code length
Length
will delete
Success!
all existing
2 blinks
access
+ 2 beeps
codes!
1 blink
+ 1 beep
9 9