Changing The Battery; Battery Jump - Allegion SCHLAGE TOUCH Mode D'emploi

Changing the Battery

»
Tip: Replace the batteries in your lock at the same time each year that you test
and replace the batteries in your smoke alarms. This will ensure continued reliable
operation. Use a high-quality alkaline 9 volt battery for replacement.
»
If your lock's low battery icon is lit, replace the battery as soon as possible.
1. Remove the inside cover.

Battery Jump

The emergency battery jump start can be used if your battery is dead to unlock your door.
Do not remove the battery until you have opened your door.
WARNING: The lock will remain unlocked until you change the battery or manually
relock the door from the inside!
1. Connect a new high-
quality alkaline 9 volt
battery to the contacts
below the touchscreen
keypad.
»
Keep the battery
connected to the jump
start contacts as you
unlock your door.
4. Replace the dead battery with the new 9 volt battery.
See Changing the Battery above.
Lithium Batteries?
Lithium batteries may have a longer life, but when they begin to fail, they fail
quickly. We don't recommend them because they don't give you a lot of time to
change your batteries before the lock is completely dead.
2. Replace the battery.
2. Enter a User Code into
the keypad.
3. Re-tuck wires so they will
not be crimped. Replace
the cover.
3. Rotate the thumbturn
toward the hinges.
7 7