Lock Parts; Programming Code And Default Access Codes - Allegion Schlage Sense Mode D'emploi

Lock Parts

DOOR EXTERIOR
Touchscreen
Inside Schlage
Button
Thumbturn
Outside Schlage
Button
Touchscreen
Cylinder
Alarm Speaker
Bolt

Programming Code and Default Access Codes

The programming code and default access codes are located on one sticker, and the
HomeKit setup code is located on the other sticker.
Front of this user guide
User Guide
Setup Code
Código de configuración
Code de configuration
Place Label Here XXX-XX-XXX
Poner la etiqueta aquí
Placer l'autocollant ici
0000000
XXX-XX-XXX
Default Codes
Códigos de predeterminado
0000000
Codes du défaut
Place Label Here
PLEASE KEEP CONSERVE VEUILLEZ
Poner la etiqueta aquí ESTA GUÍA CONSERVERCE
THIS GUIDE
GUIDE
Placer l'autocollant ici
You will need ¡Necesitará
estos códigos Vous aurez besoin de
these codes to
para operar la ces codes pour faire
operate your lock!
cerradura! fonctionner la serrure!
4
Outside Schlage
Button
Touchscreen
Cylinder
• Located on the inside of the door.
• Used to silence the alarm.
• Does not lock or unlock the door.
• Used to lock and unlock manually from the inside.
• Located on the outside of the door.
• Locks the deadbolt with 1-Touch Locking.
• Illuminate the lock's touchscreen for access code entry.
• Remains unlit until a button is pressed.
• Located on the outside of the door.
• Used to enter access codes.
• Used to lock door (default setup).
• Used to unlock in emergency situations.
See Emergency Key Override on page 14.
• Sounds alarms based on the chosen settings.
Alarm can be programmed in the app.
• Automatically extends and retracts when the lock's touchscreen
is used.
• Manually extends and retracts when the thumbturn is rotated.
XXX-XX-XXX
0000000
DOOR INTERIOR
Alarm
Alarm Speaker
Inside Schlage
Button
Thumbturn
Bolt
Back of the Alarm
»
You must remove the alarm from the door
to see these stickers.