Changing Woofer Orientation - Martin Logan Dynamo 600X Manuel De L'utilisateur

Figure 25. D 800X, 1100X, and 1600X are capable of both front-firing and down-firing woofer orientations.
ynamo

Changing Woofer Orientation

D 800X, 1100X, and 1600X
ynamo
Please note: When configured in the front-firing orientation a
right angle adaptor is required if using an XLR connection.
When installing the subwoofer in a cabinet it is recommended
that the subwoofer be converted to a front-firing configuration.
1 Prepare a flat surface with a blanket to protect the finish.
Unplug signal and power connections. Remove the grill cloth,
if installed.
2 Carefully lay the subwoofer on its side. Remove the rubber
cap, unscrew the attached spike, and remove the foot.
3 Change the location of the four feet.
4 Reinstall the foot, spike, and, if desired, the rubber cap.
Figure 26. To change woofer orientation, remove the rubber cap, spike,
and foot, change location, and reinstall.
17