Changing Woofer Orientation - Martin Logan Dynamo 1500X Manuel De L'utilisateur

Figure 10. The Dynamo 1500X is capable of both front-firing and down-firing woofer orientations.

Changing Woofer Orientation

When installing the subwoofer in a cabinet it is recom-
mended that the subwoofer be converted to a front firing
configuration (see figure 10).
1 Prepare a flat surface with a blanket to protect the fin-
ish. Unplug signal and power connections. Remove the
grill cloth.
2 Carefully lay the subwoofer on its side. Using a coin,
unscrew the attached feet (see figure 11).
3 Change the location of the four feet.
4 Using a coin, reinstall the feet (see figure 11).
Please note, 90° RCA adaptors may be required to
make signal connections. Two 90° RCA adaptors are
included with the subwoofer.
Figure 11. To change woofer orientation, use a coin to unscrew the
attached feet, change location, and reinstall.
Placement 27