Declaration Of Conformity - Worx WX252 Mode D'emploi

TROUBLE SHOOTING
Problem
Battery will not
charge
Switch cannot be
pressed
XTD Driver stops
during driving
screws

DECLARATION OF CONFORMITY

We,
POSITEC Germany GmbH Konrad-Adenauer-Ufer 37 50668 Köln
Declare that the product,
Description Battery-powered Screwdriver
Type WX252 WX252.1 (250-269- designation of machinery,
representative of Cordless Screw Driver)
Function Tightening and loosening screws, nuts
Complies with the following Directives,
2006/42/EC, 2011/65/EU, 2014/30/EU
Standards conform to
EN 55014-1
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14
9LT, UK
Suzhou 2016/04/05
Allen Ding
Deputy Chief Engineer,Testing & Certification
Possible cause
1. Charger not
plugged into a work-
ing outlet.
2. Surrounding air
temperature is too
hot or too cold
Forward/Reverse
switch at middle
position
XTD Driver battery is
out of power
EN 55014-2 EN 60745-1
Solution
1. Plug charger into a working outlet.
Check current by plugging in a lamp.
2. Move charger to an appropriate
place which temperature is suitable
for the charger.
Make sure switch is on Forward or
Reverse rotation according to project
need.
Make sure XTD Driver is fully charged
before using it.
EN 60745-2-2
EN
11