Declaration Of Conformity; Environmental Protection - Worx WX279 Mode D'emploi

TROUBLE SHOOTING
1. I CAN NOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
The battery can be inserted into the charger only in
one direction. Turn the battery around until it can
be inserted into the slot, the red LED Light should
turn on when the battery is charging.
2. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES
Charging time problems, as above, and having
not used a Battery Pack for a prolonged time will
reduce the Battery Pack working time. This can
be corrected after several charge and discharge
operations by charging & working with your drill.
Heavy working conditions such as large screws
into hard wood will use up the Battery Pack energy
faster than lighter working conditions. Do not
re-charge your Battery Pack below 0
30 C as this will affect performance.
o
MAINTENANCE
Remove the battery pack from the machine
before carrying out any adjustment,
servicing or maintenance.
Your power tool requires no additional lubrication
or maintenance.
Your power tool requires no additional lubrication
10 10
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Lithium-Ion Brushless impact wrench EN
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Cordless Impact Wrench
Type WX279 WX279.9 (279 - designation of
machinery, representative of Impact Wrench)
Function Tightening and loosening screws, nuts
Complies with the following Directives:
2006/42/EC
2011/65/EU
2014/30/EU
C and above
o
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-2
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
Suzhou 2017/02/08
Allen Ding
Deputy Chief Engineer,Testing & Certification