Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note:
The washer and nut are to the inside of the
vehicle. See figure 14
11. Next take a hammer and lightly tap your skid
plate against the nuts that secure the front
plow mount. This will leave witness marks so
you can trim or use a 1 in. hole saw to make
clearance for the reinstallation of the two front
skid plate bolts previously removed. See figure
15.
12. Reinstall the previously removed skid plate
bolts. See figure 16.
WARN® INDUSTRIES
PAGE 8
Figure 14
Figure 15
Figure 16
86388A0
Publicité
Table des Matières
