Temperature; Clock - Philips AVENT SCD565E Mode D'emploi

Press any key to stop the alert. If you do not
7
stop the alert, it stops automatically after
2 minutes.
7.6.2 Repeat the feed timer
After step 5 in 'Setting and using the feed
1
timer', select 'Repeat' with the + and - buttons.
Press OK to confirm.
Choose 'Repeat ON' or 'Repeat OFF' and
2
press OK to confirm.
Select 'xx:xx Start' with the + and - buttons
3
and press OK to activate the feed timer
repeat function.
When you press any key to stop the feed
4
timer alert or if the alert stops automatically
after 2 minutes, the feed timer starts counting
down again.
7.6.3 Stopping the timer
Press the menu button and select 'Feed Timer'.
1
Use the + and - buttons to select 'Stop' and
2
press OK to confirm.

7.7 Temperature

A baby sleeps comfortably at a temperature
between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range.
You can also set a temperature alert to warn you
that the temperature is outside the set range.
Select 'Temperature' in the menu with the +
1
and - buttons and press OK to confirm.
Select 'Temp Range' with the + and - buttons
2
and press OK to confirm.
• The minimum temperature indication starts
flashing on the display.
Use the + and - buttons to set the minimum
3
temperature range between 10°C/50°F and
19°C/66°F. Press OK to confirm.
• The maximum temperature indication starts
flashing on the display.
Use the + and - buttons to set the
4
maximum temperature range between
22°C/72°F and 37°C/99°F. Press OK to confirm.
Select 'Alert' with the + and - buttons. Press
5
OK to confirm and to start setting the
temperature alert.
• The message 'Alert' appears on the display.
Select 'Alert ON' or 'Alert OFF'. Press OK to
6
confirm.
If you choose 'Alert On', the temperature
•
alert symbol appears on the display.
Select 'Temp Scale' with the + and - buttons.
7
Press OK to confirm and to start setting the
temperature scale.
Select 'Celsius' or 'Fahrenheit' and press OK to
8
confirm.
• The temperature in the set scale appears
on the display.
• If the temperature is outside the set range,
the temperature alert symbol on the display
flashes and the message 'TOO HOT' or 'TOO
COLD' appears on the display. If you set the
alert to on, the parent unit also beeps.

7.8 Clock

The default setting for the clock is hidden. You can
choose to show the clock and set the clock time
in the menu of the parent unit.
Select 'Clock' in the menu with the + and -
1
buttons and press OK to confirm.
Use the + or - button to select 'Show Time'
2
and press OK to confirm.
Select 'Set Time' with the + and - buttons. Press
3
OK to confirm and to start setting the clock.
• The hour indication starts flashing on the
display.
17