VTech KidiZoom PRINTCAM Manuel D'instructions page 20

a. Format
This will erase all data in the internal memory or memory card
(if one is inserted).
b. Factory Reset
Factory Reset will erase the contents (including photos, videos and
files) stored in the internal memory and reset all system settings to
factory default, such as the file index, camera settings and game
progress. Files in the memory card (if used) will not be erased.
Note: When a memory card is inserted, data stored in the internal
memory cannot be accessed on the camera unless the memory card is
removed. When the memory of the camera is getting full, or when the
file indexes are used up, back up all the files to your computer and then
delete all the files on your camera. To do this, either go to Settings and
format the memory, or delete all photos and videos from Playback mode.
3. Camera Settings
Photo Resolution
Photos can be saved at either 5 MP, 2 MP, or 0.3 MP quality
settings.
Please refer to the Product Specifications and Storage Capacity
sections for more details.
Indoor Light Frequency
The default frequency is set according to your region. Please leave
your camera set to the default value unless you are traveling.
4. Date & Time
To change the date or time, press the OK Button
Directional Buttons
Button
5. Language
Choose from a list of available languages to change the text interface
of the camera.
6. Parental Controls
The Parental Controls menu allows you to limit playtime for the
games or set a print limit.
Press and hold the Star Button
asking for a passcode. Use the Directional Buttons
two-digit answer to the math problem and press the OK Button
20
to proceed.
0 2
0 2
to adjust the settings and press the OK
to save.
until you see a pop-up message
and use the
to enter the