Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
depleted. Disconnect the device when it is fully charged. Do not leave
the device charging for more than 7 hours.
Note: The actual charging time depends on the charging current,
the existing charge and the ambient temperature of the charging
environment.
The optimal ambient temperature is 32°F to 104°F (0°C to 40°C).
Battery Life
Like with other electronic devices, the more the camera is used, the more
quickly the battery will drain. The battery will last approximately four
hours with continuous use while taking photos and videos. However, with
more printing usage, the battery will last much shorter. The remaining
battery capacity will display
in the top right corner of the screen. When
the battery level is low
, the system will restrict printing and reduce the
speaker volume. Recharge the battery before further use. When the
battery level is too low
, the camera will not turn on until it is charged.
Automatic Shut-Off
To preserve battery life, the KidiZoom
will automatically
PrintCam
TM
®
shut off after a few minutes without input.
Battery Maintenance
Charge the camera regularly to keep it operating at optimal performance,
even when the camera isn't in use. Be sure to charge the camera at
least every six months.
This toy contains batteries that are non-replaceable.
WARNING
PLEASE READ THOROUGHLY BEFORE GIVING THIS PRODUCT
TO A CHILD. KEEP AWAY FROM FIRE OR ANY HEAT SOURCES.
BATTERIES CANNOT BE REPLACED.
The batteries within this toy are permanently encased. Before giving this
toy to a child make sure there are no signs of damage. Regularly check
the toy and dispose of it immediately if there are any signs of damage.
Do not dispose of the toy in a fire, as the batteries may leak and explode.
Keep batteries safely out of children's reach before disposing of them
via a safe disposal system.
12
2
1
2
1
Publicité
Table des Matières
