Connecting To Compressed Air Supply - Miller FILTAIR Manuel Du Propriétaire

5-5. Connecting To Compressed Air Supply

OM-260 545 Page 18
2
1
! Shut off air supply before
disconnecting or connecting
air hose.
! Wear protective equipment
when disconnecting com-
pressed air supply. Internal
air tank is under pressure
and will discharge when air
supply is disconnected.
! Latch filter and close door
before starting unit or oper-
ating filter cleaning system.
! Do not direct air stream to-
ward self or others.
! If ANY air is injected into the
skin or body seek medical
help immediately.
3
1 3/8 NPT Compressed Air
Fitting
2 Compressed Air Supply (80 −
100 psi / 3.8 − 4.8 kPa)
3 Air Hose
Install customer-supplied com-
pressed air fitting in 3/8 NPT fitting
on front of unit.
Connect customer-supplied air
hose to fitting when Filter Pressure
gauge indicates cleaning is re-
quired.
Tools Needed:
260 887-B