Vicks V3900 Série Manuel D'utilisation Et D'entretien page 4

chanGinG your filter ( ' .)
cont d
To change the filter:
Step 1 Step 2
Uses replacement filter Turn off and unplug
WF2. your humidifier.
Step 5 Step 6
Soak new filter in cool DO NOT wring filter.
water.
chanGinG the uV BulB
The UV bulb will operate for an average output of 2,000 - 3,000 hours. When the change UV bulb indicator
light illuminates on the control ring on front of the unit it is time to change your UV bulb. To purchase a
replacement UV bulb contact 1-800-477-0457 or consumerrelations@kaz.com.
Step 1 Step 2
Turn off and unplug remove and empty the
your humidifier. water tank.
Step 5 Step 6
Unscrew old bulb and replace door and
replace with new one. screws and reassemble
unit.
6
Step 3 Step 4
remove the water tank. remove and discard
old filter.
Step 7 Step 8
Insert new filter into replace the water tank.
unit by gently folding
and inserting into filter
slot.
Step 3 Step 4
remove the filter, Turn base over,
empty the base of locate door, and
water and dry. * remove screws with
Philips screwdriver.
* Warning: carefully empty water
from base using the directional arrows
imprinted on the unit to be certain no
water enters it. Completely dry base
before changing UV Bulb.
chanGinG the uV BulB ( ' .)
cont d
NOTE: Discard the old UV bulb cartridge at a household hazardous waste collection site. Bulb and
bulb housing are not intended for use with any other product or purpose.
Lamp contains mercury. Manage in accordance with disposal laws.
See www.lamprecycle.org or call 1-800-895-8842.
cleaninG
Cleaning involves two steps, SCALE REMOVAL and DISINFECTING. Be sure to perform these in the
proper order to avoid harmful chemical interactions.
NOTE: REMOVE FILTER BEFORE CLEANING.
Failure to remove filter during cleaning will destroy the filter
SCALE REMOVAL
Step 1 Step 2
Turn off and unplug remove and empty
your humidifier. water tank.
DISINFECTING
Step 1 Step 2
Turn off and unplug remove and empty
your humidifier. water tank.
Step 3 Step 4
remove filter and rinse thoroughly with
using undiluted vinegar, water to remove
wipe base and tank scale. *
thoroughly.
Step 3 Step 4
remove filter and fill Wipe base with the
water tank with 1 tsp same solution.
of bleach and 1 gallon
of cool water. Do not
overfill water tank.
7