To verify that installation is complete, print a
configuration page from the control panel.
Press
to open the printer menus. Press
to select INFORMATION, and then press
. Press
to select PRINT
CONFIGURATION, and then press
See the use guide on the CD-ROM that
came with the printer for information about
gaining access to the printer driver, setting
the control panel, using the stacker or stapler/
stacker, solving problems, and for warranties
and regulatory statements.
hp LaserJet
Make sure that the configuration page lists
the stacker or stapler/stacker as an installed
accessory. If the stacker or stapler/stacker is
not listed on the configuration page, see the
use guide on the CD-ROM that came with
the printer.
.
4250/4350 series
1