Table Des Matières; Tools Required; Torque Specifications - Warn 83875 Instructions D'installation

Failure to observe these instructions could lead to minor or moderate injury.
 Always take time to fully read and understand the installation and Operations Guide included with this product.
 Never operate this product if you are under 16 years of age.
 Never operate this product when under the influence of drugs, alcohol or medications.
Table of Contents
I.

Tools Required ..................................................... 2

II. Torque Specifications ........................................... 2
III. Parts List .............................................................. 3
IV. Installation ......................................................... 4-5
V. Operation .......................................................... 5-6
VI. Tips/Troubleshooting ............................................ 7
VII. Maintenance/Care ................................................ 7
I. Tools Required
• Ratchet
• Sockets: 15mm,16mm,17mm,19mm
• Wrenches: 15mm,16mm,17mm,19mm
• Torque Wrench
• Torx #30
• 3/16 Allen Wrench
• Thread lock compound
II. Torque Specifications
Please use the recommended torque specifications
when assembling this product unless otherwise speci-
fied in the instructions.
10mm diameter bolts and nuts 30 ft.lbs (40.7 N-m)
12mm diameter bolts an nuts
WARN® INDUSTRIES
CAUTION
Moving Parts Entanglement Hazard
Read installation and operating instructions thoroughly.
55 ft-lbs (74.6 N-m)
PAGE 2 83874A0