Mounting Optional Elements And Accessories; Arch Attachment - Steelcase Bivi Manuel D'utilisation

Mounting optional elements and accessories

Mounting optional elements and accessories
Steelcase recommends assembly by a specialist dealer or an assembly company.
If you want to mount optional elements and accessories, please follow the respective installation instructions.
The following sections illustrate the installation of some optional elements and accessories.
Some extension variants are not possible for safety reasons or technical reasons. If necessary, the
impermissible configurations are explained in the following sections.

Arch attachment

The arch attachment is mounted on a foot of a workstation.
This requires the following components:
Arch attachment
•
2 Phillips screws per arc attachment
•
Arch attachment, dual-workstation variant
1 Low arch attachment
2 High arch attachment
If you want to assemble yourself, please follow the respective installation instructions.
Bivi Manual -en- 2019 Page 25 of 53