Changing The Rod; Mounting The Quick-Change Push-Head Adapter - Wohler 42 Mode D'emploi

3. Changing the rod

Wöhler Viper 42
3. Changing the rod
For changing the rod, you first have to unwind the old GRP rod completely.
After that, pull it out of the basket sleeve.
Install the new rod by reversing the above steps.
Make sure that the rod end is reliably locked in place in the sleeve.
Note:
The GRP rod inside the viper may break when exposed to high temperatures
(more than 80 °C). In summer, do not leave the viper inside the car over lon-
ger periods of time. You can protect the viper against high temperatures by
simply covering it, e.g. with a blanket.

4. Mounting the quick-change push-head adapter

5
3
1
4
2
9
e-Mail: mgkg@woehler.com http://mgkg.woehler.com