Operation; Working With The Cable Ø 16 Mm - Wohler RM 200 Instructions De Service

4

Operation

4.1 Working with the cable Ø 16 mm
Fig. 4: Wöhler RM 200 with cable, protec-
tion hose already assembled.
Fig. 5: Protection hose fixed above cable,
locking bolt marked by an arrow
WARNING!
Set the control switch to "OFF" before assembling
the cables, the guide hose and the drills.
Insert the cable through the machine shaft.
•
Pull the protection hose over the cable from
•
behind and fix it with the locking bolt.
ATTENTION!
Always use the guide hose. It acts as a vibration-
damping guide for the cables, as a dirt holder and
guard, also as a safety element for the operating
personnel and prevents uncontrolled banging!
Operation
EN
29